Social:

Elevator Car Technology’s 2:1

           
① Diverter pulley
2:1 Process standard configuration;
Equipped with telescopic rods for easy suspension outside the shaft.
② Climber adapter
A dedicated adapter (exclusive to each manufacturer) can connect the climber and fasten it to the side of the car ceiling beam.
③ High speed climber
LTD100-10P18 Electric Control Integrated Cable Climber, at a speed of 18m/min.
④ Safety tong trigger
The Safety tong can be manually triggered to lock the platform;
After using the secondary protective chain, the guide rail can be lifted using a climber.
⑤ Trigger adapter
A dedicated adapter (exclusive to each manufacturer) can be connected to the safety gear trigger and fastened to the side of the car ceiling beam.
⑥ Steel Wire Rope and Rope Collection Bucket
For climbers Ф 10.2 steel wire rope and its winding device;
The length of the steel wire rope should be configured to at least twice of the shaft height.
⑦ Elevator car ceiling platform
Aluminum protective railings should be installed around the platform.
⑧ Anti-derailment protection system
The climber control box is equipped with an anti-derailment switch socket. The anti-derailment switch component should be connected to the climber and installed on the platform to support the guide rail laterally.
⑨ Safety tong assembly
The second descent protection of the platform is achieved by manually triggering the Safety tong trigger or automatically triggering the speed limiter.
⑩ Diverter counter weight
Keep the steel wire rope of the climber tightened and suspended, and maintain a 2:1 process mode without entangling the steel wire rope.

Top

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept